大尺寸电阻加热式碳化硅晶体生长热场设计与优化

大尺寸低缺陷碳化硅(SiC)单晶体是功率器件和射频(RF)器件的重要基础材料,物理气相传输(physical vapor transport, PVT)法是目前生长大尺寸SiC单晶体的主要方法。获得大尺寸高品质晶体的核心是通过调节组分、温度、压力实现气相组分在晶体生长界面均匀定向结晶,同时尽可能减小晶体的热应力。本文对电阻加热式8英寸(1英寸=2.54 cm)碳化硅大尺寸晶体生长系统展开热场设计研究。首先建立描述碳化硅原料受热分解热质输运及其多孔结构演变、系统热输运的物理和数学模型,进而使用数值模拟方法研究加热器位置、加热器功率和辐射孔径对温度分布的影响及其规律,并优化热场结构。数值模拟结果显示,通过优化散热孔形状、保温棉的结构等设计参数,电阻加热式大尺寸晶体生长系统在晶锭厚度变化、多孔介质原料消耗的情况下均能达到较低的晶体横向温度梯度和较高的纵向温度梯度。     

Enthalpy Relaxation Study of Poly(Vinyl Chloride) Films Based on the Time-Temperature Superposition Principle

Abstract

In the enthalpy relaxation of poly(vinyl chloride), a decrease in enthalpy upon the isothermal ageing was measured using the differential scanning calorimetry method as a function of ageing time (t_A) and ageing temperature. The range of the ageing temperature was from 56?°C (T_g ? 25?°C) to 72?°C (T_g ? 9?°C) where T_g denotes the glass transition temperature. The limiting value of the decrease in enthalpy was determined by applying a stretched exponential function to the measured enthalpy data. The relaxation function (?) was derived from the measured enthalpy and the construction of a master curve was tried by shifting the ? ? t_A curves of the respective ageing temperatures horizontally. Although there was no agreement between the shift factors (a_T) and the relaxation times of the ? ? t_A curves, the superposition was successfully constructed and the a_T values obtained for the poly(vinyl chloride) sample were found to be comparable to those reported for viscoelastic experiments over a broad temperature range above and below T_g carried out for different polymers. The origin of the decrease in enthalpy was briefly discussed in terms of the chain dynamics in the isothermal condition.     

对史密斯-帕塞尔自由电子激光光栅的研究

为了研究史密斯-帕塞尔自由电子激光的输出频率和光栅槽深、光栅槽长、光栅槽宽的关系,对于基于矩形光栅的史密斯-帕塞尔自由电子激光利用粒子模拟软件进行模拟和理论分析。首先,利用粒子模拟软件模拟对于基于矩形光栅的史密斯-帕塞尔自由电子激光进行了研究,发现史密斯-帕塞尔自由电子激光的输出频率随光栅槽深、光栅槽长、光栅槽宽的增大而减少。接着,对史密斯-帕塞尔自由电子激光的光栅槽进行了理论分析,发现每个光栅槽都可以等效为一个LC谐振电路,并发现在史密斯-帕塞尔自由电子激光中存在两种辐射,一种是史密斯-帕塞尔辐射,另一种是LC振荡辐射。最后,对光栅槽的LC振荡辐射进行了估算,发现史密斯-帕塞尔自由电子激光输出频率的模拟值与光栅槽的LC振荡辐射估算值的数量级均为102 GHz,且变化规律上一致。据此推测决定史密斯-帕塞尔自由电子激光输出频率的应该是光栅槽,而不是谐振腔。     

Lipase‐Supported Metal–Organic Framework Bioreactor Catalyzes Warfarin Synthesis

A green and sustainable strategy synthesizes clinical medicine warfarin anticoagulant by using lipase‐supported metal–organic framework (MOF) bioreactors (see scheme). These findings may be beneficial for future studies in the industrial production of chemical, pharmaceutical, and agrochemical precursors.     

Physical aging in amorphous poly(ethylene furanoate): Enthalpic recovery,density, and oxygen transport considerations

The current work utilizes three separate techniques to study the physical aging process in amorphous poly(ethylene furanoate) (PEF), which is a recently introduced engineering thermoplastic with enhanced properties compared to petroleum‐sourced poly(ethylene terephthalate). Differential scanning calorimetry aging experiments were conducted at multiple aging temperatures and times, and the resultant enthalpic recovery values compared to the theoretical maximum enthalpy loss evaluated from calculations involving extrapolation of the equilibrium liquid line. Density measurements reveal densification of the matrix for the aged versus unaged samples, and provide an estimate for the reduction in free volume for the aged samples. Complementary oxygen permeation and pressure‐decay sorption experiments provide independent verification of the free volume reduction mechanism for physical aging in glassy polymers. The current work provides the first detailed aging study for PEF. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 389–399     

A multiperiod model for estimating the cost of deposit insurance under the Basel III minimum capital requirement

Under the Basel III regime, a commercial bank is considered adequately capitalized if it maintains a ratio of capital to total risk-weighted assets or capital adequacy ratio (CAR) of at least 8%. We model a commercial bank that complies with Basel III's minimum capital requirement on an interval $[0,T]$ for $T>0$. The bank model is achieved via a specific rate of capital influx that fixes the bank's CAR at the minimum prescribed level of 8%. On the basis of this capital influx rate, we derive models for the bank's asset portfolio and capital dynamics required for maintaining the CAR at the minimum prescribed level. For the aforementioned bank, we further study a deposit insurance (DI) pricing problem with a coverage horizon equal to $T$ years. More specifically, we employ a multiperiod DI pricing model to approximate the cost of DI for the bank on the interval $[0,T]$, where the constant (minimum) CAR is maintained. We study the behaviours of the models leading to the constant (minimum) CAR, and the behaviour of the DI premium estimate by means of numerical simulations. In the simulation study pertaining to the DI premium estimate specifically, we determine the effects of changes in the bank's initial leverage level (deposit-to-asset ratio), the DI coverage horizon, and the volatility of the asset portfolio on the DI premium estimate.     

Above,below, and in‐between the two glass transitions of ultrathin free‐standing polystyrene films: Thermal expansion coefficient and physical aging

In previous work we observed two simultaneous transitions in high molecular weight (MW) free‐standing polystyrene films that were interpreted as two thickness‐dependent reduced glass transition temperatures (T_gs). The weaker lower transition agreed well with the MW‐dependent T_g(h) previously reported, while the much stronger upper transition matched the MW‐independent T_g(h) previously observed in low‐MW free‐standing films. Here, we investigate the nature of these two transitions by inspecting the temperature dependence of the films' thermal coefficient of expansion (TCE) and present physical aging measurements using ellipsometry both below and in‐between the two transitions. TCE values indicate approximately 80 to 90% of the film solidifies at the upper transition, while only 10 to 20% remains mobile to lower temperatures, freezing out at the lower transition. Physical aging is observed at a temperature below the upper transition, but above the lower transition, indicative of the upper transition being an actual glass transition associated with the α‐relaxation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 64–75     

On log-normal convolutions: An analytical–numerical method with applications to economic capital determination

We put forward an efficient algorithm for approximating the sums of independent and log-normally distributed random variables. Namely, by combining tools from probability theory and numerical analysis, we are able to compute the cumulative distribution functions of the just-mentioned sums to a high precision and in a relatively short computing time. We illustrate the effectiveness of the new method in the contexts of the individual and collective risk models, aggregate economic capital determination, and economic capital allocation.     

PVT法氮化铝晶体铝面、氮面生长对比分析

在氮气环境下用PVT方法生长氮化铝过程中,氮面和铝面由于表面化学性质不同,生长的主要化学反应速度存在差异。原子在生长表面的迁移能力不同造成单晶表面生长方式差异较大。在基本相同条件下(生长温度、生长温差、生长气压、类似的籽晶、同一台生长设备)进行了铝、氮面氮化铝单晶晶体生长。为了更明显地表现铝氮面的差异,将同一片籽晶分为两半,翻转其中一半让铝氮面同时生长。铝面生长较好的区域形成了明显的晶畴,而氮面生长时生长较好的部分出现了明显的生长台阶,并出现了晶畴边界被生长台阶湮灭的生长现象,进一步通过AFM观测到铝面生长台阶平整但被缺陷所阻隔,晶畴发育明显为各晶畴独立生长。氮面生长台阶没有铝面规则但连续性较强,在原来晶畴边界位置也出现了连续的生长台阶(或台阶簇)。所以籽晶质量不高时氮面生长更容易提高晶体质量,后续的XRD测量结果也证明了氮面生长后的晶体质量明显高于铝面生长的晶体质量。